Quintum AXT800-SG (8 FXO Ports) -Survivable
Tenor AX MultiPath Switch
2 or 4 Analog line and trunk interfaces
Up to 4 simultaneous VoIP calls
Available in MultiPath or Gateway configurations
Support for external Quintum Tenor Monitor
Support for external Remote Management Session Server*
Intelligent VoIP Access Solutions for remote offices and SOHO environments
CALL MANAGEMENT FEATURES
Automatic call type detection: Voice/Modem/Fax
Answer and Disconnect Supervision
Trunk group support
Public and private dial plan support
User programmable dial plan support
Forced IP routing and IP port mapping
Pass-through support for calls to Toll-Free, local and special service numbers
(ie. emergency services, etc.)
Automatic appending and stripping of digits to dialed numbers
Call Detail Records
Least cost routing with external Quintum VoIP
Call Routing Server*
Type I Caller ID/Name support (Telcordia, ETSI, NTT and DTMF)
TECHNICAL SPECIFICATIONS
Telephony Specifications
Voice algorithms: G.723.1a, G.729ab, G.711
Auto codec negotiation
Fax support: Industry standard T.38 and Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps
Modem over IP
Choice of 8, 16, or 24 FXS and/or FXO configurations or a 48 FXO only configuration
Standard 50 pin RJ-21 Telco connectors
Coding: A-law, -law
Enhanced (Carrier Grade) Echo Cancellation: ITU Rec.
G168, up to 128 msec tailsize
Loop Start, Reverse Battery, Battery Disconnect
Tandem/TDM switching
Maximum Call Rate: 1,800 calls/hour
IP Network Specifications
LAN Interface: 1 Fast Ethernet port (10/100 Base-T)
Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections
DHCP Client
QoS Support: IP TOS, DiffServ
VoIP Network Specifications
SIP User Agent
SIP RFC2833 for DTMF signaling
SIP Supplementary Services
SIP Refer Method Support
Message Waiting Indicator
Adaptive Voice Activity Detection (VAD) with Comfort
Noise Generation (CNG)
Adaptive Jitter Buffer
Packet Loss Compensation
NATAccess - NAT/Firewall
Security: IP Filtering
Up to 48 simultaneous VoIP calls
Support for DNS-SRV
Survivability - (Option only available in AXM, AXT and AXE Series)
SIP Outbound Proxy
Supports up to 100 SIP endpoints
Configuration/Management
Auto-Provisionable
Quintum Tenor Configuration Manager (GUI) for configuration of remote
individual Tenors.
Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring
Remote access with external Remote Management Session Server
SNMPv2 Agent
Command Line Interface
GENERAL SPECIFICATIONS
Dimensions: 1U High Chassis
W 17 3/8" x H 1 3/4" x D 10 3/4"
W 44.5cm x H 4.5cm x D 27.6cm
Maximum weight: 10 lbs. (4.55kg)
AC Power: 100-240 Volts AC, 50/60 Hz, 60 watts
Operating temperature: 40 - 104 F (5 - 40 C)
Operating humidity: 20% - 80% non-condensing
Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03
EMC: FCC Part 15 EN55022, EN55024,
EN61000-2-3, EN61000-3-3, AS/NZS3260
Safety: UL60950, EN60950, AS/NZS60950 |
